blob: c509f528a033c59d161cd0a2bc2cc6529c53f9b7 [file] [log] [blame]
#pragma once
#include <kint.h>
/**
* ATA PIO Driver for Bluejay. This should be replaced by a proper
* ATAPI driver later on, but for now this will do. It is going to
* be horribly slow by virtue of having to pass all data through
* in() and out().
*/
// status codes
enum
{
ATA_BSY = 0x80, // Busy
ATA_RDY = 0x40, // Ready for command
ATA_DRQ = 0x08, // Ready for data
ATA_DF = 0x20,
ATA_ERR = 0x01, // Error code placed in error register
};
// IO ports
enum
{
ATA_PORT_CMD = 0x1f7,
ATA_PORT_DATA = 0x1f0,
ATA_PORT_DRIVE_SEL = 0x1f6,
ATA_PORT_SECTOR_COUNT = 0x1f2,
ATA_PORT_LBA_LOW,
ATA_PORT_LBA_MID,
ATA_PORT_LBA_HIGH,
};
// Commands
enum
{
ATA_CMD_READ = 0x20,
ATA_CMD_WRITE = 0x30,
};
void ata_pio_wait_bsy();
void ata_pio_wait_drq();
void ata_pio_read_sectors(void *buffer, uint lba, uchar num_sectors);
void ata_pio_write_sectors(uint lba, uchar num_sectors, void *buffer);
uint ata_pio_get_error();
void test_ata_pio();